Vers notre nouveau site web :
Link to our new web site :
| Mécatriel Canada Inc | 666 montée Monette, St-Mathieu Québec, Canada J0L 2H0 (450) 659-4467 1-877-659-4467 Fax : (450) 659-7808 |
|
|
CENTERING DEVICEDESCRIPTIONMecatriel’s centering device is a system made to center loads on the conveyor. Of a width of 4 or 5', the centering device is used to center and to square the load. The mechanism is made up of two carts linked symmetrically in such a way that loads are centered once it is activated. Each cart is supplied with a pivoting head adapted to the rollers. When the carts reach the protective cardboard (often found under bundles of cardboard), the heads lift it and then pivot while centering device the load. The centering device is often used to prepare loads for the strapping unit (picture below). A 1½ HP motor is used to move the carts. The transmission is done with a torq limiter in order to protect the mechanical parts from an overload or against possible blockage. This last transmits the power to two #60 chains to which the carts are fixed. Movement is done on rails with cam follower.
SPECIFICATIONS
|
|