Vers notre nouveau site web :
Link to our new web site :
| Mécatriel Canada Inc | 666 montée Monette, St-Mathieu Québec, Canada J0L 2H0 (450) 659-4467 1-877-659-4467 Fax : (450) 659-7808 |
|
|
GRAVITY CONVEYORSDESCRIPTIONMécatriel’s gravity conveyor is used to facilitate movement of loads at a relatively low cost. Inclining the conveyor, allows charges to move from one station to another.. Also it can be used as out-rigger for zero pressure conveyors transporting large loads. The structure of the conveyor is made of structural "C" beams from C3 to C6 or "C" folded metal plate 11 gauge, depending on the desired strength required. In addition, a large array of rollers are available anywhere from Ø1", 18 gauge to the robust Ø6", 0.500” wall thickness. This allows us to offer a vaste range of conveyors. |
|
Nominal width Total width Total length Minimum height
Charge capacity Rollers Shafts Bearings Structure |
6" to 96", 1/8" increments Nominal width + 2"@ + 4” 12" to 240" per section. 2 ¼" T.O.R. or C2 or 2" folded steel or aluminium plate 3 ¼" T.O.R. or C3 or 3" folded steel or aluminium plate 4 ¼" T.O.R. or C4 or 4" folded steel or aluminium plate 5 ¼" T.O.R. or C5 Up to 2000 lbs/ft for a width of 4' 1" to 6", 10 gauge at 0.500” wall thickness. Hexagonal or round. Commercial or precision. Structural "C" beams from C3 to C6 or folded plates. |
|