We are specialized in design and building handling equipments for all kinds of loads and we also have the know how for specials projects. All of our equipments are made for heavy duty use and minimal maintenance.

For all your manipulation and handling problems, rest assured that we will know how to satisfy your requirements as well as your performances criterias. We offer turnkey projects and other types are avalable.

Mécatriel Canada inc. is always on the look out for new technologies that will increase the efficiency of our conception and fabrication process. By using the finest and most up-to-date equipment we ensure our position as the elite in the area of conception and fabrication of made to measure machinery. 

Plates feeder

Mécatriel’s pick and place device is a system made to transport sheets using suction cups.

A motor is used to move the cart horizontally. An timing belt allowing a smoother movement ensures transmission. Also, bumpers are installed at both extremities of the run. Linear rails to limit friction ensure the movement. Linear rails also ensure vertical movement. Pneumatic cylinders ensure the movement, one with a brake in case of failure of the pneumatic system. In order to prevent a failure of the suction cups used to transport the sheets, security arms on pivots slide under the cups after the lift.

Specifications

Sheets lenght :
150''
Sheets width :
13''
Sheets height :
1/8'' to 1 3/8''
Stacks height :
30''
Capacities :
275 lbs/sheet to 24000 lbs on the conveyors
Speed :
200 sheets/hour

Tape Dispenser

Mecatriel’s ribbon distributor is a system created to apply ribbons during manufacturing of cardboard on the corrugator.

Ribbon rolls are installed on cars that move on linear rolls. The movement of the car is ensured by servo-motors for maximum precision of position. Ribbon tension is kept constant in relation to the speed of the cardboard with the help of a mechanical system using a counter weight and a brake. The ribbon is transported to an applicator controlled by a pneumatic cylinder. When required, the applicator lifts allowing the operator to thread the ribbon around the rollers.

Specifications

Depth :
 40''
Width :
114''
Height :
 83''
Positioning precision :
0.020''
Setting time :
4 secondes

Stacker

Mécatriel’s stacker is a system created to transport wooden boards and stack them.

Robot hand device

Copyright © 2007 Mecatriel Canada Inc. Tous droits réservés.