Mecatriel zero pressure roller conveyors are used to transport and accumulate loads. Thanks to the reaction speed of the drive and breaking systems, this conveyor allows a precise positioning of loads and minimizes the distance between them, which optimizes the use of the conveyor.

Mecatriel line shaft conveyor

The chain driven conveyor is used to transport loads where belt driven conveyors cannot be used.

Mecatriel belt conveyor has been designed to transport a wide variety of products in order to meet the needs of different industries.

Mecatriel chain conveyor is used for pallet handling.

Mecatriel gravity conveyor is used to facilitate movement of loads at a low cost. Tilting the conveyor allows charges to move from one station to another. It can be used with motorized conveyors to support oversized loads.

Mecatriel chain transfer is built to move charges laterally on a conveyor.

Mecatriel pusher is a system created to transfer charges from one conveyor to another with the help of a pusher-cart.

Mecatriel manual roller transfer is a non-motorized system that allows loads to be transferred to an adjacent conveyor.

Mecatriel centering unit is a system made to center loads on a conveyor.

Mecatriel X rotating device is used to rotate small to medium size loads at a low cost, the H table being used for large size loads. It can be used in any position on the conveyor to pivot a charge at 90 degrees. It can also be used between two strapping units to strap loads on two axes.

Mecatriel H rotating device is used to rotate large loads by 90, 180, 270 or 360 degrees and can be used at any point on a conveyor. It can also be used between two strapping units to tie loads on two axes. Finally, it can be used as part of a packing unit. That way, the cellophane roll support only has to go up and down to wrap a load.

Mecatriel rotating conveyor is used to pivot loads. Used in the corners, it orientates the load on the axis of a conveyor and its driven rollers allow it to transfer the load to that conveyor. It can also serve as a steering knuckle at the intersection of two conveyors.

Mecatriel fork entry is a system made to allow the loading and unloading of a conveyor with the help of a fork truck.

Mecatriel motorized transfer car is a system made to create a transition between conveyors.

Mecatriel shuttle is made to create a transition between two conveyors. The shuttle can move laterally to make a transition between two out-of-line conveyors. It can also move within the axis of the conveyors to create a link between two distanced conveyors.