Mécatriel’s palletizer is used to center loads, square and insert pallets under them. The length of the load is measured when going into the palletizer in order to ensure proper centering within the axis of the conveyor. Once positioned, the load is centered laterally and squared on the width of the conveyor by a hydraulic centering system. In the meantime, a pallet is prepared and centered on a chain conveyor perpendicular to the line. The charge is then lifted by forks moved by a hydraulic system while the pallet is brought under the bundle with the help of the chain conveyor.

The pallet store is offered with many configurations. The palletizer with side access has one or two pallets distributors allowing the distribution of up to two different types of pallets of predetermined sizes. The palletizer with front access has up to four pallet distributors allowing the distribution of up to four different types of pallets of predetermined sizes. As for the pallet robot, it can distribute to the palletizer up to 12 types of pallets.

Specifications

Wall opening :
 96''
Load width :
8'' to 90''
Load lenght :
 18'' to 120''
Load height :
18'' to 78''
Minimum height :
12'' T.O.R. with adjustment + 1/2" / –1/8"
Charge capacity :
3000 lbs
Rate :
120 loads/hour
Hydraulic system :
10 HP motor, 1500 Psi of pressure
Rollers :
2½", 11 gauge, hexagonal 11/16", commercial bearing
Movement :
On rails and linears bearings
Copyright © 2007 Mecatriel Canada Inc. Tous droits réservés.